Supervisor and supervisee expectations

No abstract available

Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices

The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding

Experimental Analysis of Ultra Wideband In Vivo Radio Channel

In this paper, we present the experimental analysis of in vivo wireless channel response on Ultra-Wideband (UWB) with the frequencies between 3.1-10.6 GHz. The analysis proves the location dependent based characteristics of in vivo channel. The results clearly show the highly multipath scenario. It can also be observed that the multipath effect of the channel is much higher in the denser areas, i.e. an antenna placed within the intestine area or inside the stomach. Results prove that in vivo channel is different from a conventional communication channel and therefore extensive studies need to be done to understand the channel

Comprehensive design and propagation study of a compact dual band antenna for healthcare applications

In this paper, a dual band planar inverted F antenna (PIFA) has been investigated for cooperative on- and off-body communications. Free space and on-body performance parameters like return loss, bandwidth, radiation pattern and efficiency of this antenna are shown and investigated. The on- and off-body radio propagation channel performance at 2.45 GHz and 1.9 GHz have been investigated, respectively. Experimental investigations are performed both in the anechoic chamber and in an indoor environment. The path loss exponent has been extracted for both on- and off-body radio propagation scenarios. For on-body propagation, the path loss exponent is 2.48 and 2.22 in the anechoic chamber and indoor environment, respectively. The path loss exponent is 1.27 for off-body radio propagation situation. For on-body case, the path loss has been characterized for ten different locations on the body at 2.45 GHz, whereas for off-body case radio channel studies are performed for five different locations at 1.9 GHz. The proposed antenna shows a good on- and off-body radio channel performance

Exploiting Lack of Hardware Reciprocity for Sender-Node Authentication at the PHY Layer

This paper proposes to exploit the so-called reciprocity parameters (modelling non-reciprocal communication hardware) to use them as decision metric for binary hypothesis testing based authentication framework at a receiver node Bob. Specifically, Bob first learns the reciprocity parameters of the legitimate sender Alice via initial training. Then, during the test phase, Bob first obtains a measurement of reciprocity parameters of channel occupier (Alice, or, the intruder Eve). Then, with ground truth and current measurement both in hand, Bob carries out the hypothesis testing to automatically accept (reject) the packets sent by Alice (Eve). For the proposed scheme, we provide its success rate (the detection probability of Eve), and its performance comparison with other schemes

Multi-hop Cooperative Relaying for Energy Efficient In Vivo Communications

This paper investigates cooperative relaying to support energy efficient in vivo communications. In such a network, the in vivo source nodes transmit their sensing information to an on-body destination node either via direct communications or by employing on-body cooperative relay nodes in order to promote energy efficiency. Two relay modes are investigated, namely single-hop and multi-hop (two-hop) relaying. In this context, the paper objective is to select the optimal transmission mode (direct, single-hop, or two-hop relaying) and relay assignment (if cooperative relaying is adopted) for each source node that results in the minimum per bit average energy consumption for the in vivo network. The problem is formulated as a binary program that can be efficiently solved using commercial optimization solvers. Numerical results demonstrate the significant improvement in energy consumption and quality-of-service (QoS) support when multi-hop communication is adopted

Electromagnetic Properties of Plant Leaves at Terahertz Frequencies for Health Status Monitoring

The realization of water as an important and fundamental component requires in photosynthesis, nutritional transport, and to the effective and timely growth of plant leaves. In this work, a novel technique has been presented to determine the electromagnetic parameters of plant leaves. The measurements results of electromagnetic parameters are discussed in detail. Upon a close observation, it has been found both permittivity and a refractive index of fresh leaves showed a decline trend in their peak values from day 1 to 4 due to the rapid evaporation of moisture in tissues of leaves, and variations occurred in the morphological structure of fresh and water-stressed leaves. The technique proposed here can be employed for feasible and non-invasive plant leaves health monitoring

Performance of ultrawideband wireless tags for on-body radio channel characterisation

Experimental characterisation of on-body radio channel for ultrawideband (UWB) wireless active tags is reported in this paper. The aim of this study is to investigate the performance of the commercially available wireless tags on the UWB on-body radio channel characterisation. Measurement campaigns are performed in the chamber and in an indoor environment. Statistical path loss parameters of nine different on-body radio channels for static and dynamic cases are shown and analyzed. Results demonstrated that lognormal distribution provides the best fits for on-body propagation channels path loss model. The path loss was modeled as a function of distance for 34 different receiver locations for propagation along the front part of the body. A reduction of 11.46% path loss exponent is noticed in case of indoor environment as compared to anechoic chamber. In addition, path loss exponent is also extracted for different body parts (trunk, arms, and legs). Second-order channel parameters as fade probability (FP), level crossing rate (LCR), and average fade duration (AFD) are also investigated

Experimental study of on-body radio channel performance of a compact ultra wideband antenna

In this paper, on-body radio channel performance of a compact ultra wideband (UWB) antenna is investigated for body-centric wireless communications. Measurement campaigns were first done in the chamber and then repeated in an indoor environment for comparison. The path loss parameter for eight different on-body radio channels has been characterized and analyzed. In addition, the path loss was modeled as a function of distance for 34 different receiver locations for propagation along the front part of the body. Results and analysis show that, compared with anechoic chamber, a reduction of 16.34% path loss exponent is noticed in indoor environment. The antenna shows very good on-body radio channel performance and will be a suitable candidate for future efficient and reliable body-centric wireless communications

An Invariant Dual-beam Snowflake Antenna for Future 5G Communications

A broadband snowflake antenna for future 5G and millimeter-wave communications is presented. The proposed antenna has a size of 8 × 5 mm 2 . The antenna consists of a central hexagon surrounded by a series of symmetrically placed smaller hexagons around it, resulting in broadband characteristics. The impedance bandwidth of the proposed antenna ranges from 25.284-29.252 GHz. The antenna has a gain of 3.12 dBi at 28 GHz and is more than 98% efficient. A distinct feature of the proposed antenna is its dual-beam radiation pattern. The two beams remain fixed at ±50° even if the frequency is varied with in its operating band. The proposed antenna is modelled on thin Rogers substrate which makes it very useful for future 5G smart phones